Dyson Cyclone V10™ cordless stick vacuum

/content/dam/contentfragment/dyson/prospect-capture/ca/en/prospect-capture-ca-en

Activate your warranty

You can get support that's tailored to you, owner exclusives and more when you register your machine.
Activate your warranty

"Watch video"

Video Transcript

Open video transcript

"Watch video"

Video Transcript

Open video transcript

"Watch video"

Video Transcript

Open video transcript

"Watch video"

Video Transcript

Open video transcript

Video Transcript

Open video transcript

"Watch video"

The lights on your machine

Learn about the lights on your machine and what to do if they turn on, or start flashing.
Video Transcript

Open video transcript

"Watch video"

Understanding the power modes

Learn about your machine's three power modes, and when to use them.
Video Transcript

Open video transcript

"Watch video"

Setting up the docking station

See how to fit the docking station, and recharge your machine.

"Watch video"

Video Transcript

Open video transcript

"Watch video"

Video Transcript

Open video transcript

Video Transcript

Open video transcript

"Watch video"

Flashing filter light

The light flashes intermittently when the filter isn’t fitted correctly, and your machine will stop. See how to refit it, and get your machine running again.
Video Transcript

Open video transcript

"Watch video"

Checking for blockages

If an object becomes lodged, your blockage indicator light will flash, and your machine may stop working. Follow our step-by-step guide to check every part.
Video Transcript

Open video transcript

"Watch video"

Resetting the brush bar

The brush bar is designed to shut off when jammed. Learn how to remove the debris, and reset the brush bar.

Three power modes

Toggle between Suction mode 1 and 2 – and MAX mode, for stronger suction. To change modes, simply slide the control back and forth.
Switch accessories quickly

The quick-release tools click into place, and release in moments by simply depressing the release switch.
Don't overfill it

To maintain suction, keep an eye on the bin and empty it as soon as debris reaches the MAX marker.

Secure the charging dock

Leave at least 1.2m between the floor and the lowest screw point. Make sure it's within easy reach of a power socket so the cable has some slack.

Wash the filter regularly

Rinse under a cold tap until the water runs clear – you don't need any detergents. Shake off any excess water, then leave to dry for at least 24 hours before refitting.

Clean awkward spaces

Remove the wand and connect your chosen tool directly to the inlet pipe to use the vacuum as a handheld.

Docking station installation guide

Check your docking station installation guide online or download a copy

PDF 1.98 MB

Frequently asked questions

Is my machine compatible with the Dyson Cyclone V10 Dok™?

Yes, the Dyson Cyclone V10 Dok™ is compatible with all Dyson Cyclone V10™ cordless vacuums.

Discover more about the Dyson Cyclone V10 Dok™

How often does the filter on this machine need washing?

We recommend that you clean the filter at least once a month. You can find filter maintenance instructions in the machine's User Guide.

Can I use this machine with an extension cable?

No, the use of an extension cable is not recommended.

Can I use this machine to pick up liquids?

No. Don't pick up water or other liquids with your machine.